Cisco SPA 112/122 Analog Adapter configuration

Assigning the Server Address to a Cisco SPA 112

  1. Connect router to power.
  2. Connect internet connection to "Internet" port on rear of the device.
  3. Connect your phone to the line 1 jack on the back of the phone.
  4. From your phone dial **** to access the IVR System
  5. When prompted dial 110# to obtain the IP Address of your device.
  6. From the PC connected to the same network,  open an Internet window and enter the following URL: http://X.X.X.X/admin/resync?http://config.nuvio.com/linksys/$PN/$MA.cfg replace the X.X.X.X with the IP Address that you obtained in step 5
  7. If prompted for login information use the following. Username: admin Password: admin
  8. Router will reboot automatically and download the appropriate configuration information.

If your device successfully contacts our servers your screen will display " SPA112 will resync the profile when it is not in use and reboot." You may close this screen. The device is registered and the phone should now have dial tone. If you are unable to get a dial tone or you did not see the successful message, please call customer care at 866.482.2173.

 

Assigning the Server Address to a Cisco SPA 122

  1. Connect router to power.
  2. Connect internet connection to "Internet" port on rear of the device.
  3. Connect a computer to the Ethernet port on the back of the device.
  4. From that computer open an Internet window and enter the following URL: http://192.168.15.1/admin/resync?http://config.nuvio.com/linksys/$PN/$MA.cfg
  5. If prompted for login information use the following. Username: admin Password: admin
  6. Router will reboot automatically and download the appropriate configuration information.

If your device successfully contacts our servers your screen will display " SPA122 will resync the profile when it is not in use and reboot." You may close this screen. The device is registered and the phone should now have dial tone. If you are unable to get a dial tone or you did not see the successful message, please call customer care at 866.482.2173.

Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk