Adding a Bluetooth Headset to the Cisco SPA525

Here are the steps to pair your headset.

To configure the phone to work with your headset, first enable Bluetooth:

  1. Press Setup.
  2. Select User Preferences.
  3. Select Bluetooth Configuration.
  4. With Bluetooth selected, press the Right Arrow key to turn Bluetooth to On
  5. Press Set.


After enabling Bluetooth, create a profile for your headset:

  1. Enable Bluetooth as described above.
  2. Press Setup.
  3. Scroll to User Preferences and press Select.
  4. Scroll to Bluetooth Configuration and press Select.
  5. Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the following:
    1. Phone—Your IP phone pairs with a Bluetooth headset only. Choose this option if you will not use the Cisco IP phone with a Bluetooth-enabled mobile phone.

    2. Handsfree—Your IP phone will operate as a handsfree device with a Bluetooth-enabled mobile phone.

    3. Both—Your Cisco IP phone uses a Bluetooth headset or operates with a Bluetooth-enabled mobile phone. Your IP phone will connect to only one device at a time (either the Bluetooth headset or the Bluetooth-enabled mobile phone. (See Mobile Phone" on page 61 Cisco SPA525G2 with your mobile phone.) If multiple Bluetooth devices are in range of the Cisco SPA 525G2, the order of devices in the Bluetooth Configuration > Bluetooth Profiles list is used, and the device with a higher priority is activated first. Scroll to Bluetooth Profiles and press the Right Arrow key to enter the profile screen.

  6. Scroll to Bluetooth Profiles and press the Right Arrow key to enter the profile screen.

  7. Press Scan to scan for your headset. Depending on the network environment (for example, the number of Bluetooth devices and noise level), your Bluetooth headset might not appear on the found devices list. Ensure the headset is powered on and has Bluetooth activated, and retry the scan.

  8. In the list of found devices, select your headset and press Select to edit the profile.

  9. Scroll to PIN and enter the PIN for your Bluetooth headset.

  10. Scroll to Connect Automatically and press the Right Arrow key to turn to On

  11. Press Connect. The profile screen displays and a check mark appears next to the headset if the connection was successful.

Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk